Unisys E-@CTION EFP9800 - Manual (Page 182)

Ithaca Peripherals Proprinter Emulation Commands
7–14 3255 4073–002
Set Emphasized Printing
Starts emphasized printing. Each line is printed twice to improve penetration of
multiple-part forms and to increase print contrast. Emphasized printing cannot
be used with the following:
•
Superscript or subscript characters
•
Block graphics mode
To return to normal print mode, use the Cancel Emphasized Printing (1B 46)
command.
Hexadecimal Decimal ASCII
1B 45 27 69 ESC E
Cancel Emphasized Printing
Returns to normal print mode after emphasized printing.
Hexadecimal Decimal ASCII
1B 46 27 70 ESC F
Set Enhanced Printing
Starts enhanced printing. Each line is printed twice to improve penetration of
multiple-part forms and to increase print contrast. Enhanced printing cannot be
used with the following:
•
Superscript or subscript characters
•
Block graphics mode
To return to normal print mode, use the Cancel Enhanced Printing (1B 48)
command.
Hexadecimal Decimal ASCII
1B 47 27 71 ESC G
Cancel Enhanced Printing
Returns to normal print mode.
Hexadecimal Decimal ASCII
1B 48 27 72 ESC H