Unisys E-@CTION EFP9800 - Manual (Page 176)

Ithaca Peripherals Proprinter Emulation Commands
7–8 3255 4073–002
Set Line Spacing to 1/6 Inch
Sets the line spacing to 1/6 inch or 6 lines/inch.
Hexadecimal Decimal ASCII
1B 41 0C 1B
32 27 65 12 27
50 ESC A 12
ESC 2
Set Form Length in Inches
Sets the length of the page until the printer is powered up again or until another
command setting the length of the page is received. Also sets the top margin
and the top line for the 1-inch vertical tab settings. For more information see
“Vertical Tab.” The form length at power on is determined by the internal switch
pack settings. For more information, see “Set Internal Switch Pack Values in
NVRAM” in section 3.
Hexadecimal Decimal ASCII Value of n
1B 43 00 n 27 67 0 n ESC C 0 n 1-22 inches per
page
Set Form Length in Lines
Sets the length of the page until the printer is powered up again or until another
command setting the length of the page is received. Also sets the top margin
and the top line for the 1-inch vertical tab settings. For more information see
“Vertical Tab.” The form length at power on is determined by the internal switch
pack settings (switch pack 1, switches 4 and 5), or you can leave it at the default
setting. For more information, see “Switch Entry Mode” in section 3.
Hexadecimal Decimal ASCII Value of n
1B 43 nn 27 67 nn ESC C nn 1-99 lines per
page