Unisys E-@CTION EFP9800 - Manual (Page 88)

Communication
5–8 3255 4073–002
with an integral shielded cable on the external power supply. It is located at the
rear of the printer.
Cash Drawer Connector Pin Assignments
The following illustration shows the cash drawer connector and pin
assignments. The cash drawer connector is 6-pin modular jack and is located at
the rear of the printer. You may use one or two cash drawers. If you use two,
connect a split cable (y-cable) to use the same connector for both.
Pin Number Signal Direction Note
1 Frame Ground
2 Drawer Drive 1 Output Drawer Solenoid 1-
3 Drawer Status Input Drawer Switch
4 +24 V +/- 5% Output Drawer Solenoid +
5 Drawer Drive 2 Output Drawer Solenoid 2-
6 Logic Ground Drawer Switch