Unisys E-@CTION EFP9800 - Manual (Page 60)

Diagnostics and Print Tests
3–22 3255 4073–002
1. Turn the printer off.
2. Turn the printer to the back to access the DIP switches and write down the
current switch settings.
3. Set the DIP switches to enable or disable the cover open switch:
Switch
1
Switch
2
Switch
3
Switch
4
Switch
5
Switch
6
Switch
7
Switch
8
ON OFF N/A OFF OFF OFF ON N/A Enable
Cover Open
Switch
ON OFF N/A ON OFF OFF ON N/A Disable
Cover Open
Switch
4. Turn the printer back on.
5. Turn the printer off and reset the DIP switches to what they were when you
started.
6. For normal operation settings, see “Switch Settings” in section 5.
7. Turn the printer back on.