Unisys E-@CTION EFP9800 - Manual (Page 221)

EF4270 Emulation Commands
3255 4073–002 9–17
Pitch Selection
Selects the character pitch, from 33 to 66 characters per line.
The default character set is defined by the internal DIP switch settings. For
more information, see “Chapter 3: Diagnostics and Print Test.” The Double Wide
command may be used with any pitch to provide a total of 6 combinations of
pitch and font.
Hexadecimal Decimal ASCII Value of n
1B 50 n 27 80 n ESC P n See table
Value of n
Hexadecimal Decimal ASCII Pitch Characters per Line
00 0 NUL 11.5 33
01 1 SOH 12.5 36
02 2 STX 13.9 40
03 3 ETX 15.3 44
04 4 EOT 17.4 50
05 5 ENQ 19.8 57
06 6 ACK 23 66