Unisys E-@CTION EFP9800 - Manual (Page 48)

Diagnostics and Print Tests
3–10 3255 4073–002
EFP9800 ESC/POS Emulation: Internal Switch Pack 3, Switches 2 and 3
Switch 2 Switch 3 Description
OFF OFF Epson 40/33 character print zone (2.506 inches wide).
OFF ON Epson 42/35 character print zone (2.506 inches wide).
ON OFF Unisys 42/35 character print zone (3.024 inches wide).
ON ON Unisys 51/42 character print zone (3.024 inches wide).
EFP9800 ESC/POS Emulation: Internal Switch Pack 3, Switches 4 and 5
Switch Settings Description
4 OFF
ON
Set the standard mode slip/validation right margin to 0.53 inches
(Epson Compatible). This only applies if switch 2 is OFF (2.506 inch
print zone). Center the print zone for standard mode. Right margin set
to 0.113 for 3.024 inch print zone or to 0.372 for 2.506 inch print
zone.
5 OFF
ON
Set the page mode slip/validation right margin to 0.53 inches
(Epson compatible).
Center the print zone for page mode. Right margin set to 0.372
inches.
EFP9800 ESC/POS Emulation: Internal Switch Pack 3, Switches 6 and 7
Switch 6 Switch 7 Description
OFF OFF Selects 14 lines (7.2 lines per inch) available when validation is
selected.
OFF ON Selects 10 lines (7.2 lines per inch) available when validation is
selected.
ON OFF Selects 6 lines (7.2 lines per inch) available when validation is
selected.
ON ON Selects 4 lines (7.2 lines per inch) available when validation is
selected.