Unisys E-@CTION EFP9800 - Manual (Page 264)

Specifications
A–10 3255 4073–002
Power Requirements
The EFP9800 printer can receive power from a remote power supply. The
voltage requirements are listed below:
Voltage Maximum Short Term Current Maximum Long Term Current
24 V +/- 5% 2.4 Amps 1.4 Amps
Environmental Requirements
Following are the environmental requirements for the EFP9800 printer:
•
Operating Temperature: 41
°
F to 120
°
F (5
°
C to 50
°
C)
•
Operating Humidity: 5% to 90%
Condensation may occur when the printer is transferred from cold to warm
areas after shipment. The printer’s design permits operation after drying out
and stabilizing at room temperature.
This printer was designed to operate in the environment outlined in this section.
Operation outside these ranges as defined may lead to degradation of the
printer functionality and reliability, and may result in higher than specified
service call rates. In environments which contain a high level of contaminants,
dirt, airborne debris or particles, preventative maintenance will be required.
Reliability
Impact Printer 15 Million Print Lines
Impact Printhead 200 Million Characters
Ribbon Cassette 5 Million Characters
Power Supply 150 Thousand On-time Hours
MICR Check Reader 500,000 Reads