Loading the new receipt/journal paper roll –7 – Unisys E-@CTION EFP9800 User Manual
Page 29
Advertising
Operating the Printer
3255 4073–002
2–7
Loading the New Receipt/Journal Paper Roll
1. Drop the new receipt/journal roll into the bucket and pull out about 10
inches (25 cm) of paper.
The paper should not extend farther than the back of the printer cabinet.
2. Close the clamshell.
3. Place the end of the journal ply between the halves of the take-up assembly.
If you are printing a journal only, continue with step 4.
If you are printing both receipts and a journal, position the top paper ply so
that it extends over the top of the slip table.
4. Press the paper feed button to wind the paper onto the take-up assembly.
5. Close the rear cover.
Advertising