Unisys E-@CTION EFP9800 - Manual (Page 186)

Ithaca Peripherals Proprinter Emulation Commands
7–18 3255 4073–002
Single-Density Graphics
Prints graphics in single-density format, in a 60 dots/inch by 72 dots/inch image
pattern.
Maximum dots/line = 144
Maximum dot resolution = 144
Maximum columns/line = 144
Hexadecimal Decimal ASCII
1B 4B
n1...n2 27 75
n1...n2 ESC K
n1...n2
Double-Density, Half-Speed Graphics
Prints graphics in double-density format, at a slower rate of speed in a 120
dots/inch by 72 dots/inch image pattern. Because of the slow speed, dot
columns can overlap by 1/2 dot width.
Maximum dots/line = 288
Maximum dot resolution = 288
Maximum columns/line = 288
Hexadecimal Decimal ASCII
1B 4C
n1...n2 27 76
n1...n2 ESC L
n1...n2
Double-Density, Normal Speed Graphics
Prints graphics in double-density format, at normal speed in a 120 dots/inch by
72 dots/inch image pattern. Dots can not be printed in adjacent columns of the
same row.
Maximum dots/line = 144
Maximum dot resolution = 288
Maximum columns/line = 288
Hexadecimal Decimal ASCII
1B 59
n1...n2 27 89
n1...n2 ESC Y
n1...n2