Unisys E-@CTION EFP9800 - Manual (Page 173)

Ithaca Peripherals Proprinter Emulation Commands
3255 4073–002 7–5
Open Cash Drawer 2
Opens cash drawer number 2. A default pulse is sent which is 120 ms high and
480 ms low.
Hexadecimal Decimal ASCII
08 8 BS
Horizontal Tab
Moves the print position to the next horizontal tab stop set by the Set
Horizontal Tab Positions (1B 44) command. The command is ignored if it
exceeds the right margin or the maximum number of tab stop settings.
Hexadecimal Decimal ASCII
09 9 HT
Line Feed
Prints and feeds the paper one line. The line spacing set by the following
commands is used: Set Line Spacing to 1/6 Inch (1B 41 0C 1B 32), Set Line
Spacing to 1/8 Inch (1B 30), Set Fine Line Spacing (n/216 Inch) (1B 33 n), Set
Fine Line Spacing (n/72 Inch) (1B 41 n 1B 32).
Hexadecimal Decimal ASCII
0A 10 LF
Vertical Tab
Advances to the next vertical tab stop. Feeds a fixed length of paper from the
current print line to the knife cut point (approximately 1 inch). Line spacing
does not affect the distance to the knife cut point.
Hexadecimal Decimal ASCII
0B 11 VT