Unisys E-@CTION EFP9800 - Manual (Page 69)

Diagnostics and Print Tests
3255 4073–002 3–31
General Print Test
This test produces a printout of all ROM CRC, internal switch pack, and
configuration information (see the sample printout on the next page). In
addition, it prints each character in the ASCII character set including all code
pages and character types (single-wide, double-wide, and so forth).
With the unit powered on the Online LED on:
1. Press the Reset button (Online LED goes off).
2. Press the Reset button (Online LED goes on).
3. Press the Paper Feed button and continue to hold it down until the printer
begins to prints.
4. Press the Paper Feed button to stop the test.
Note: After running the Print Test, it is recommended that the unit be reset
again prior to being returned to normal operation.