Unisys E-@CTION EFP9800 - Manual (Page 234)

Flash Download Commands
10–6 3255 4073–002
Write EEROM Switches
Sets the emulation EEROM switches. The command assumes that the printer
flash program memory (sectors 0, 1) have been correctly programmed. If these
sectors have been erased, the printer returns NAK. The printer returns ACK if
the command is performed successfully.
Hexadecimal Decimal ASCII
1D 0A d1, d2, d3, d4 29 10 d1, d2, d3, d4 GS LF d1, d2, d3, d4
The first data byte is the settings for switch pack #1, the second for #2 and so
on. Each internal switch pack is considered to have eight switches and the
correspondence between the data bits (di) and switches is as follows:
di (i = 1, 2, 3, 4) Bit Internal Switch Pack
di 0 Switch 1
di 1 Switch 2
di 2 Switch 3
di 3 Switch 4
di 4 Switch 5
di 5 Switch 6
di 6 Switch 7
di 7 Switch 8