Unisys E-@CTION EFP9800 - Manual (Page 105)

EFP9800 ESC/POS Commands
3255 4073– 002 6– 15
Print and Feed Paper
Prints the data in the buffer and feeds the paper a distance of n x (fundamental
calculation pitch). The maximum feed amount is 40 inches; if a greater number
is entered, the paper is fed 40 inches. See the Set Fundamental Calculation Pitch
command (1D 50).
Hexadecimal Decimal ASCII Value of n
1B 4A n 27 74 n ESC J n 0 - 255
Standard Mode
The vertical direction of the fundamental calculation pitch is used to calculate
the distance the paper is fed.
Page Mode
This command sets the print starting position to the beginning of the line n
times (fundamental calculation pitch) down from the current line. Two types of
fundamental calculation pitch are used to calculate the distance the paper is
fed, depending on the value of the Select Print Direction in Page Mode
command (1B 54 n). For more information see “ Page Mode” later in this section.
•
If 1B 54 n = 0 or 2, the vertical direction of the fundamental calculation
pitch is used.
•
If 1B 54 n = 1 or 3, the horizontal direction of the fundamental calculation
pitch is used.