Unisys E-@CTION EFP9800 - Manual (Page 33)

Operating the Printer
3255 4073–002 2–11
4. Position the slip/check so that the top is protruding from the top of the
printer.
The Slip In LED flashes green. When the slip/check is inserted properly, the
Slip In LED is lit steadily.
Depending on your printer setup, the printer may automatically begin
printing, or you may have to perform the action programmed for your
printer, such as pressing a particular keyboard key. Follow the instructions
from the host computer.
5. Remove the slip/check once it is fed back out and then follow the
instructions from the host computer to finish the transaction.