Unisys E-@CTION EFP9800 - Manual (Page 239)

Flash Download Commands
3255 4073–002 10–11
Reboot the printer
Ends the load process and reboots the printer. Before executing this command,
the printer should have firmware loaded, emulation set, EEROM switches set
and external switches set to the runtime settings. Application software for
downloading should prompt the user to set the external switches and confirm
before sending this command. If the downloading was started from a
diagnostic, the reboot will cause the printer to reenter download state unless
the external switches are changed.
Hexadecimal Decimal ASCII
1D FF 29 255 GS Space