ACU-RITE MILLPWR 2 Axes - Manual (Page 110)

PROGRAM STEPS
MILLPWR ®
Operation Manual
Circular Milling Functions
MILLPWR offers several circular milling functions that let you program pockets, frames and
rings quickly and easily.
Pocket
A pocket is a cavity or area on a part where
material is removed when you machine. You can
program a circular pocket by indicating the center
point and radius.
To program a circular pocket:
• Press the CIRCLE key.
• Press the POCKET softkey.
• Enter the X- and Y-axes coordinates for the pocket's
center point.
• Enter the depth.
• Enter the radius.
• For the "Direction,” press the CW softkey for a
clockwise direction or the CCW softkey for a
counter-clockwise direction.
.
5-21