ACU-RITE MILLPWR 2 Axes - Manual (Page 68)

PROGRAMMING
MILLPWR ®
Operation Manual 3-39
• Now press the BACKUP PROGRAMS softkey. MILLPWR will highlight the program(s)
and save a backup copy in the directory you've selected.
Note: If a program with the same name is already stored in the directory you've chosen,
MILLPWR will ask you if you want to replace the old copy with the latest copy.
Choose the YES softkey or “yes” to ALL soft key to continue or the NO softkey to
cancel.
Deleting a Program
You can delete any program that has been saved.
To delete a program:
• Select the directory that contains the program you want to delete (refer Selecting a
Directory).
• From the PGM screen, press the PROGRAM FUNCTIONS softkey, then press the
DELETE softkey.
• Using the arrow keys, highlight the program you want to delete.
• Press the DELETE softkey. You will be asked if you are sure that you want to delete
the program. Press the YES softkey to continue or the NO softkey to cancel.
By answering "Yes," you will erase the highlighted program from
memory. Deleted programs cannot be recovered unless a backup
file was created.
IMPORTANT