ACU-RITE MILLPWR 2 Axes - Manual (Page 171)

SETUP
MILLPWR ®
Tool Library
MILLPWR contains a tool library that can store the diameter, length, unit
of measure, and tool type for up to 99 tools. MILLPWR only requires that
you provide the tool's diameter; however, it’s a good idea to provide
additional information so that each tool is easier to identify from the tool
list.
You can sort the tool library by number or type.
Operation Manual 7-2
Set up the tool
library so that
the tools you
use most often
appear first.
Job Setup
Pressing the RESET softkey will clear all of the tools that are programmed in the
tool library. Only use this key when you want to start over.