ACU-RITE MILLPWR 2 Axes - Manual (Page 113)

PROGRAM STEPS
MILLPWR ®
• Select the appropriate tool offset.
• Enter the feed rate.
• If you would like to program a finish cut, press the
MORE softkey. Otherwise, press the USE key.
Finish
Enter the amount of material to be removed during
the finish cut.
Enter the feed rate for the finish cut.
Select the finish cut's direction. Press the CW softkey for a clockwise
direction or the CCW softkey for a counter-clockwise direction.
Press the USE key.
Note: If the tool size and type in the "Tool" field are incorrect, change the tool set-
tings before running the program (refer to Programming a Tool Step).
Operation Manual 5-24