ACU-RITE MILLPWR 2 Axes - Manual (Page 125)

PROGRAM STEPS
MILLPWR ®
To program a rotate:
• From the PGM screen, press the MORE STEPS softkey
• Press the ROTATE softkey.
• Enter the first and last steps in the range of steps that
you would like to rotate.
• Enter the X- and Y-axes coordinates for the center
point of rotation.
• Enter the angle (in degrees) for each rotation.
• Enter the number of times you want to rotate the
shape. If you want to rotate the program or
sections of the program you are working with, enter
“0.” If you want additional rotations of the original,
enter the number of rotations that you want in addition
to the original.
• Press the USE key.
Operation Manual 5-36
Rotate
With “Rotate,” you can rotate whole programs or sections of programs.
Note: The steps rotated
must precede the
“Rotate” step.