ACU-RITE MILLPWR 2 Axes - Manual (Page 52)

PROGRAMMING
MILLPWR ®
Operation Manual 3-23
Deleting a Directory
MILLPWR will not delete directories that contain programs. First delete each program
and subdirectories stored within the directory (refer to Deleting a Program).
To delete a directory:
• From the PGM screen, press the PROGRAM FUNCTIONS and DIRECTORY
softkeys, then press the DELETE DIRECTORY softkey.
• Identify where the directory you want to delete is located.
On MILLPWR 's internal memory:
"MILLPWR" and any subdirectories you have created should appear under
the "DIRECTORY" heading.
On a 3 1 /
2
" floppy disk:
Insert the 3 1 /
2
" floppy disk containing the directory into the disk drive
(located in the lower right-hand corner on the front of the operator console)
and press the
USE FLOPPY softkey. "A:" and any subdirectories you have
created will appear under the "DIRECTORY" heading.
On your PC:
Press the REMOTE STORAGE softkey. "REMTSTOR" and any subdirectories
you have created will appear under the "DIRECTORY" heading.
• Using the arrow keys, highlight the directory you want to delete.
• Press the ENTER key. Press the YES softkey to erase the directory or the NO softkey
to cancel.