Programming, Operation manual – ACU-RITE MILLPWR 2 Axes User Manual
Page 49
PROGRAMMING
MILLPWR
®
Operation Manual
3-20
To create directories for your programs:
•
Press the
PGM
key, the
PROGRAM FUNCTIONS
softkey and then the
DIRECTORY
softkey. Now press the
SELECT DIRECTORY
softkey, and a directory list will
appear.
•
Highlight the directory where you want to store the new subdirectory.
Select
MILLPWR
's internal memory:
"MILLPWR" and any subdirectories should appear under the "Directory"
heading.
Select a 3
1
/
2
" floppy disk:
Press the
USE FLOPPY
softkey. "A:" and any subdirectories should
appear under the "Directory" heading.
Select your PC:
Press the
REMOTE STORAGE
softkey. "REMTSTOR" and any subdirec-
tories should appear under the "Directory" heading.
•
Using the arrow keys, highlight the existing directory you want to put the new
subdirectory in. (In this example, we highlighted "MILLPWR," then created a sub-
directory entitled "COMPANY1.")
•
Press the
SELECT DIRECTORY
softkey again to verify your choice. The
"Directory" screen will disappear.
•
Now press the
DIRECTORY
softkey.
•
Press the
CREATE DIRECTORY
softkey. You will be asked to name your directory.
•
Name your directory using the numeric keys on the operator console or by
selecting letters from the
ALPHABET
option. Use the arrow keys to move from
letter to letter then press the
ENTER
key to make a selection. Program names are
limited to eight characters, consisting of numbers and/or letters.
The REMOTE
STORAGE soft-
key will only
appear if
MILLPWR has
been set up for
remote storage.