ACU-RITE MILLPWR 2 Axes - Manual (Page 112)

PROGRAM STEPS
MILLPWR ®
Operation Manual
Frame
A circular frame is determined by its center point and radius. The direction will
determine if you are climb cutting or conventional cutting. The tool offset will deter-
mine if you are cutting an inside or outside frame.
To program a circular frame:
• Press the CIRCLE key.
• Press the FRAME softkey.
• Enter the X- and Y-axes coordinates for the center
point.
• Enter the depth.
• Enter the radius.
• For the direction, press the CW softkey for
clockwise or the CCW softkey for a counter-clock-
wise direction.
5-23
INSIDE
FRAME
OUTSIDE
FRAME