ACU-RITE MILLPWR 2 Axes - Manual (Page 206)

SETUP
MILLPWR ®
Operation Manual 7-37
The system statistics keep track of the machine’s usage.
The time that the
MILLPWR system, the display and the
servo motors have been running is displayed in hours.
The “distance” values for X, Y, Z and W reflect how far
the scales have traveled for each axis.
System Statistics
To view the system statistics:
• From the Diagnostics screen, highlight "System
Statistics" and press
ENTER .
• Press the EXIT TEST softkey to close the “System
Statistics” screen.
• Continue with Diagnostics or press the USE NEW
SETTINGS softkey.
The time and date appear on the error log and on any saved part program. You can reset
the time and date at any time. Enter four digits for the year.
To change a setting:
• From the Diagnostics screen, highlight "Set Time and
Date" and press
ENTER .
• Highlight the field you wish to update.
Using the keypad, enter the appropriate number.
• Press the USE NEW SETTINGS softkey to close the “Set
Time and Date” screen.
• Continue with Diagnostics or press the USE NEW
SETTINGS softkey again.
Set Time and Date