Program steps – ACU-RITE MILLPWR 2 Axes User Manual
Page 97
Advertising
PROGRAM STEPS
MILLPWR
®
Arc
An arc can be defined several ways:
•
With a from point, to point
and a radius
•
With a from point, to point
and a center point
•
With from, to, and 3rd points along
the arc
•
With a from or to point, center point
and a sweep angle.
Choose a method based upon the information available from the print.
As you are programming, keep in mind that the arc's sweep angle is measured from the
X-axis.
To program an arc:
•
Press the
ARC
key.
•
Enter the beginning coordinates for the X-
and Y-axes in the “From” field.
•
Enter the ending coordinates for the X-
and Y-axes in the “To” field.
•
Enter a depth.
Operation Manual
5-8
Advertising