Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 117)

5-5 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
3 . If you selected IP [LAN] in step 2 , the IP Connection window appears
(figure 5-4).
Figure 5-4 — Address and password entry
a . Examine the Matrix IP Address field in the IP Connection window.
The field displays the last Extron IP address entered.
If the IP address is correct , proceed to step 3b.
If the address is not correct , either click in the Extron IP Address field
and enter the IP address or click on the scroll down button ( ) and select
from among the recently used addresses. Proceed to step 3b.
N If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
b . If the switcher is password protected, click in the Password field and
enter the enter the appropriate administrator or user password.
c . Click Connect.
If you logged on using the administrator password, the program
connects you to the matrix switcher with all of the administrator rights
and privileges. The Extron Matrix Switchers Control Program window
appears (figure 5-5 and figure 5-6, on page 5-6 and page 5-7), displaying
the current configuration of the attached matrix. Proceed to step 4.
If you logged on using the user password, the program connects you to
the matrix switcher with only user capabilities.
If an incorrect password was entered, the program beeps and returns to
the password entry display.