Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 61)

3-29 CrossPoint 450 Plus and MAV Plus Switchers • Operation
5 . Exit RGB Delay mode : Press and release the RGBHV button.
I / O
RGBHV AUDIO The Audio button lights red.
Press the RGBHV button
to exit RGB delay mode.
All input buttons and output buttons
return to unlit or background illumination.
The RGBHV button stops
blinking and returns to unlit
or background illumination.
Using presets
The current configuration (configuration 0) can be saved as a preset in any one
of 64 preset memory addresses. Presets can be saved and recalled from the front
panel. The preset locations are assigned to the input buttons. When a preset is
retrieved from memory, it becomes the current configuration.
N • All switchers have 64 presets, selectable from the front panel, regardless of the
matrix size.
• Only the audio and video ties are stored and recalled; audio gain and volume
settings are not saved, and they do not change when a preset is recalled.
• Presets cannot be viewed from the front panel unless recalled as the current
configuration. Presets can be viewed using the Extron Windows-based
control program. See chapter 5, “Matrix Software”, for more details.
• The current configuration and all presets are stored in non-volatile memory.
When power is removed and restored, the current configuration is still active
and all presets are retained.
• When a preset is recalled, it replaces the current configuration, which is lost
unless it is also stored as a preset. The recalled preset overwrites all of the
current configuration ties in favor of the preset configuration ties.