Control tab, And chapter 6, "html, Operation – Extron Electronics MAV Plus series Large Scale User Guide User Manual
Page 151
6-13
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Control Tab
Set and View Ties page
You can create ties on the Set and View Ties page (figure 6-11). Access the Set and
view Ties page by clicking the Control tab.
RGBHV & Audio Settings*
* If no audio BME is installed in your system, this link reads “RGBHV Settings” or “Video Settings”.
Global Presets
Refresh or Select a
Different Output
Group for Ties
Figure 6-11 — User Control Ties page
The page consists of a matrix of input (rows) and output (columns) selection
buttons of four different colors:
•
The amber buttons indicate video and audio ties.
•
The green buttons indicate video only ties.
•
The red buttons indicate audio only ties.
•
The gray buttons indicate no ties.
N
If you lose track of the input and output associated with a specific button, stop
the mouse pointer over a button. As shown on figure 6-11, a field pops up that
identifies the input and output numbers for that button.