Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 66)

Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-34
5 . Unmute the outputs : One at a time, press and hold the Output 3 button and
then the Output 4 buttons for approximately 2 seconds until each button
lights steadily. The output 3 and output 4 signals are unmuted.
3
4
3
4
Unmute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button. The button returns to its previous indication
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
The button returns to its previous indication
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
N If RGBHV or video and audio are both selected, the unmute action toggles both
the video and audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
6 . Exit View-only mode : Press and release the View button to exit View-only mode.
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.