Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 118)

Matrix Software, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-6
4 . Use the program to operate the switcher as follows:
• To create a tie, drag an input box to one or more output boxes. To remove
a tie, drag the output box to its tied input box or to the trash can.
• To set up audio in Follow mode (audio and video have the same tie
configuration), select the Follow box at the bottom of the window. To
set up audio in breakaway mode (audio and video have different tie
configurations), deselect the Follow box.
• To make the control program easier to use, assign a device icon to each
input and output. Click on a box that represents an input or output, and
drag the desired icon onto the box from the icon palette that appears.
Figure 5-5 — Extron Matrix Switchers Control Program window