Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 122)

Matrix Software, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software 5-10
Date, Time (local), and GMT (offset) fields
The Date field displays the current date in the Greenwich Mean Time zone.
The Time (local) field displays the current time in the local time zone.
The GMT field displays the amount of time, in hours and minutes, that the local
time varies from the GMT international time reference.
N Rather than the following procedure, your can click the Sync Time to PC
button to set the switcher to your computer’s internal time.
If desired, adjust any of these values as follows:
1 . Click in the desired field. The field changes to an editable field appropriate to
the value being change and the graphic cursor becomes a text cursor.
• The Date field becomes a set date field, with the
date in the format (M)M/(D)D/YYYY. Leading
zeroes are not shown.
• The Time (local) field becomes a set time field,
with the time in the format HH:MM:SS (00:00:00
to 23:59:59).
• The GMT field becomes a set offset field, with the offset in the
format ±HH:MM (–12:00 to +14:00).
2 . Edit the field as desired to set the proper value. For time, remember to use
24-hour time. Leading zeroes are optional.
3 . Press the Tab key on the keyboard or click in another field to exit the set date
field.
4 . Click the Take button to make the date change take affect.