Extron Electronics MAV Plus series Large Scale User Guide User Manual
Page 153
6-15
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
RGBHV and Audio Settings page
N
The control options on this page vary, depending on the configuration of the
matrix switcher system.
The RGB and Audio Settings page provides the means to:
• Systems with MAV Plus audio BMEs only — Set the system's audio
parameters (input audio gain and attenuation and output volume).
• Systems with CrossPoint 450 Plus sync BMEs only — Set the RGB delay
(switching interval).
• Mute and unmute all video and audio outputs as applicable to the system.
Access the RGB and Audio Settings page (figure 6-12) by clicking the RGB & Audio
Settings
link on the Set and View Ties page.
Set and View Ties
Global Presets
Refresh*
* If no audio BME is installed in your system, this link and the banner on top of the page read
“RGBHV Settings” or “Video Settings”.
Figure 6-12 — RGB and Audio Settings page