Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 133)

5-21 CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
Hardware status — Provides an overall view of the status of the matrix switcher,
including the power supply voltages, the temperature status, the Remote
RS-232/RS-422 port configuration, and the installed and updated firmware
status (figure 5-16).
Green — Proper operation.
Red — Component has failed.
White — Component is not installed.
Figure 5-16 — Status window
Name presets — Allows you to assign a name to each of the 64 global memory
presets and 100 room presets.
N Preset names are limited to 12 upper- and lower-case alphanumeric characters,
space, and the _ and / characters.
N The following characters are invalid in preset names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Show RS-232 Strings — Displays the ASCII commands that are used by the
current configuration. You can refer to these for SIS programming.
I/O group settings — Allows you to establish I/O groups.
Room configuration — Allows you to assign outputs to rooms or delete outputs
from rooms.
N A Room is a subset of outputs that are logically related to each other, as
determined by the operator. The matrix switcher supports up to 10 rooms, each
of which can consist of from 1 to 16 outputs.
Initialize — Initializes and clears any or all of the following: ties, presets, preset
names, icon names, and icons.