Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 143)

6-5 CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Configuration Tab
System Settings Page
The switcher BME 0 downloads the System Settings page (figure 6-4) when
you click the Configuration tab. The screen consists of fields in which you can
view and edit IP administration and system settings. See appendix A, “Ethernet
Connection”, for basic information about IP addresses and subnetting.
Passwords
Refresh
Firmware Upgrade
Email Settings
Figure 6-4 — System Settings page
On password-protected connections, there are two levels of protection:
administrator and user. Administrators have full access to all switching capabilities
and editing functions. Users can create ties, create and recall presets, set video and
audio mutes, and view all settings with the exception of passwords.
• Ethernet connection to the switcher, either entering SIS commands (see
chapter 4, “Programmer’s Guide”) or using the Extron Matrix Switchers
Control Program (see chapter 5, “Matrix Software”) is password protected.
• Serial connection via either RS-232 or RS-422 is not password protected.