Extron Electronics MAV Plus series Large Scale User Guide User Manual
Page 129
5-17
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
14
. Navigate to and select the new firmware file. The Choose Firmware File
window closes.
N
When downloaded from the Extron Web site, the firmware is placed in a subfolder
of C:Program Files\Extron\Firmware.
C
The firmware file must have a .s19 extension. Other
file types can cause the switcher to stop functioning.
Figure 5-13 — Choose Firmware File window
15
. In the Firmware Loader window, click Begin.
The Total Progress and Progress status bars show the progress of the
upload. The firmware upload to the switcher may take several minutes.
Once the status bars have progressed from 0% to 100%, and Status is listed
as Complete, the firmware loader utility resets the switcher.
Figure 5-14 — Firmware Loader screen
16
. Click Exit to close the Firmware Loader.