Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 145)

6-7 CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Date/Time Settings fields
The Date/Time Settings fields (figure 6-5) provide a location for viewing and
setting the time functions.
Figure 6-5 — Date/Time Settings fields
To sync BME’s clock to the connected PC, click the Local Date/Time button and
then click the Submit button.
N Use of the Local Date/Time button has no effect on the Zone and Daylight
Savings Time functions.
For more control of the date and time settings, change the settings as follows:
1 . Click the desired value’s drop box. The adjustable variables are month, day,
year, hours, minutes, AM/PM, and (time) zone. A drop-down scroll box
appears (the year drop box is selected in figure 6-5).
2 . Click and drag the slider or click the scroll up button or the scroll down
button until the desired value is visible.
3 . Click the desired value.
N When setting the time, set the local time. The Zone variable allows you to then
enter the offset from Greenwich Mean Time (GMT).
N The Zone field identifies the standard time zone selected and displays the
amount of time, in hours and minutes, that the local time varies from the GMT
international time reference.
4 . Repeat steps 1 through 3 for other variables that need to be changed.
5 . If desired, select the Daylight Saving radio button appropriate for your region
or nation.
N When Daylight Saving Time is turned on, the switcher updates its internal
clock between Standard Time and Daylight Saving Time in the spring and
fall on the date that the time change occurs in the country or region selected.
When Daylight Saving Time is turned off, the switcher does not adjust its time
reference.
6 . Click the Submit button.