Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 97)

4-9 CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N • Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02 &003*003%4*24$.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003$).
• The ! tie command, & tie command, and % tie command can be used interchangeably.
N When you create a tie where
X!
= 00, you tie no input to the specified output (
X@
) (untie
X@
).
When you create a tie where X@ = 00, you untie all outputs from input X! .
N The & tie commands for RGB and % tie commands for video can be used interchangeably.
Tie input X! to output X@ ,
video and audio
X! * X@ ! Out X@
• In X!
• All ] Tie input X! 's video and
audio to output
X@
(audio follow).
Example: 1*3! Out03 • In01 • All ] Tie input 1 to output 3.
Tie input
X! to output X@
,
RGBHV only
X!
*
X@
& Out
X@
• In
X!
• RGB
] Tie RGB only
(video breakaway).
Example
(see 2nd Note, above): 10*4& Out04 • In10 • RGB
] Tie input 10 RGB to output 4.
Tie input
X! to output X@
,
video only
X!
*
X@
% Out
X@
• In
X!
• Vid
] Tie video only
(video breakaway).
Example
(see 2nd Note, above): 7*5% Out05 • In07 • Vid
] Tie input 7 to video output 5.
Tie input X! to output X@ ,
audio only
X! * X@ $ Out X@
• In X!
• Aud ] Tie audio only
(audio breakaway).
Example
(see 2nd Note, above): 24*4$ Out04 • In24 • Aud ] Tie input 24 audio to output 4.
Quick multiple tie E
+Q
X!
*
X@
!...
X!
*
X@
!
}
Qik
] !, &, %, and $ are valid.
Example: E
+Q3*4!3*5%3*6$
}
Qik
] Tie input 3 video and audio
to output 4, tie input 3 video
to output 5, and tie input 3
audio to output 6.
Tie input to all outputs,
video and audio X!
*! In
X!
• All
] Tie video and audio
(audio follow).
Example: 5*! In05 • All ] Tie input 5 video and audio
to all outputs.
Tie input to all outputs,
RGBHV only X! *& In X!
• RGB ] Tie RGB only
(video breakaway).
Example
(see 2nd Note, above): 28*& In28 • RGB
] Tie input 28 RGB to all
outputs.
Tie input to all outputs,
video only X!
*% In
X!
• Vid
] Tie RGB only
(video breakaway).
Example
(see 2nd Note, above): 14*% In14 • Vid
] Tie input 14 video to all
outputs.
Tie input to all outputs,
audio only X!
*$ In
X!
• Aud
] Tie audio only
(audio breakaway).
View ties
N The & view tie command for RGB and % view tie command for video can be used interchangeably.
View video and audio
output tie X@
!
X!]
Input
X!
video and audio is
tied to output
X@
.
View RGB output tie X@
&
X!]
Input
X!
RGB is tied to
output
X@
.
View video output tie X@
%
X!]
Input
X!
video is tied to
output
X@
.
Command/response table for SIS commands
N
X!
= Input number for tie 00 – (maximum number of inputs for your model) (00 = untie)
X@
= Output number 00 – (maximum number of outputs for your model) (00 = untie)