Operation, cont’d – Extron Electronics MAV Plus series Large Scale User Guide User Manual
Page 40
Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-8
f
Esc (
>
) button —
The Esc (
>
) button has two primary functions (•) and six
secondary (❏) functions:
• Cancels operations or selections in progress and resets the front panel
button indicators.
N
The Esc (
>
) button does not reset the current configuration, the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus video switchers) button
and Audio selection button, any presets, or any audio gain or attenuation or
volume settings.
• Flashes once to indicate that the escape function has been activated.
❏
In the I/O Group mode, selects group 4 and indicates the selection. See
"I/O grouping" on page 3-23.
❏
(Systems with CrossPoint 450 Plus Wideband switcher BMEs)
Increases the RGB delay of switches to the selected output. See "Setting
RGB delay (systems with wideband BMEs)" on page 3-27.
❏
(Systems with audio BMEs) Increases the audio level of the selected
input. See "Viewing and adjusting the input audio level (systems with
audio BMEs)" on page 3-35.
❏
(Systems with audio BMEs) Increases the volume of the selected output.
See "Viewing and adjusting the output volume (systems with audio
BMEs)" on age 3-38.
❏
With the Enter, Preset, and View buttons, selects Serial Port Configuration
mode. See "Selecting the rear panel Remote port protocol and baud rate"
on page 3-46.
❏
Selects 115200 baud for the RS-232/RS-422 port in Serial Port Configuration
mode and indicates the selection. See "Selecting the rear panel Remote
port protocol and baud rate" on page 3-46.