Extron Electronics MAV Plus series Large Scale User Guide - Manual (Page 156)

HTML Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation 6-18
Change the RGB delay (systems with CrossPoint 450 Plus sync BMEs)
The RGB delay interval defines how long the screen is blanked when switching to
a new input for the selected output. This value can be set from 00 to 5 seconds in
0.5-second increments.
Change the RGB delay as follows:
1 . Click the Output drop box. A drop-down scroll box appears (figure 6-17).
Figure 6-17 — Output selection drop box
2 . Click and drag the slider or click on the scroll up button or scroll down
button until the desired output is visible.
3 . Click the desired output.
4 . Click the RGB delay drop box. A drop-down scroll box appears (figure 6-18).
Figure 6-18 — RGB delay drop box
5 . Click the desired RGB delay.