Physio-Control LIFEPAK 15 - Manual (Page 181)

DATA TRANSMISSION
8
©2007-2013 Physio-Control, Inc. LIFEPAK 15 Monitor/Defibrillator Operating Instructions
8-3
About Transmitting Patient Records and
Reports
You can transmit current and archived data from the LIFEPAK 15 monitor/defibrillator to the
LIFENET ® System or to post-event review products such as CODE-STAT™ or DT EXPRESS™
software.
The LIFEPAK 15 monitor can transmit patient reports using the following methods:
• Bluetooth ® wireless connection—If your LIFEPAK 15 monitor has the Bluetooth feature
installed and enabled, you can transmit data using a wireless connection.
• Direct cable connection—You can use a special cable to establish a direct connection from the
LIFEPAK 15 monitor to a PC or gateway, and transmit data using this wired connection.
Figure 8-1 represents an overview of the data transmission process.
Figure 8-1 Transmitting Data from the LIFEPAK 15 Monitor/Defibrillator
For information about configuring your LIFEPAK 15 monitor to work in the LIFENET System, see
the LIFENET System help documentation or contact your Physio-Control representative.
CODE-STAT/DT EXPRESS
Software
Gateway
LIFENET
System
LIFEPAK 15
Monitor
Transmission via
wireless or cable
connection
Transmission via
wireless or cable
connection
Transmission
via wireless
connection