Establishing a bluetooth connection, Using bluetooth wireless communication – Physio-Control LIFEPAK 15 User Manual

Page 186

Advertising

8-8

LIFEPAK 15 Monitor/Defibrillator Operating Instructions

Using Bluetooth Wireless Communication

Establishing a Bluetooth Connection

You must know the friendly name of the target device that you want to connect to.

To establish a Bluetooth connection:

After you establish a Bluetooth connection, you are ready to transmit patient data. Proceed to

"Transmitting Reports" on page 8-12.

1. On the LIFEPAK 15 monitor, use the SPEED

DIAL

to select the Bluetooth icon and access

the Bluetooth Setup menu.

2. Select CONNECT and then select FIND

DEVICES

. This will disconnect any existing

connections.

Note: If the LIFEPAK 15 monitor is set to
WIRELESS OFF

, wireless status changes to

WIRELESS ON

Connect

Search Filter

Passcode...

Wireless

Disconnect

(Not Connected)

Find Devices...

0000

Bluetooth Setup

LIFEPAK 15 Device ID: LP151234

• The Find Devices menu appears. The

monitor begins searching for Bluetooth
devices that are in the area and that meet
the search filter criteria.

• Devices are displayed in the order

found—the most recently found device
appears at the top of the list.

3. When the desired device appears, press the

SPEED DIAL

to select STOP and end the

search. You return to the Bluetooth Setup
menu.

C_EMS123
C_EMS345
B_HOSPITAL1
B_HOSPITAL2
C_EMS456
C_EMS789

C_HOSPITAL3

Stop

When device appears, select Stop

4. Use the SPEED DIAL to scroll through the list

and select the desired device.

5. If you are connecting to a PC, you may be

prompted to acknowledge the connection.
Enter the passcode, if requested, and then
accept the connection.

When the connection is made, an alert tone
sounds, the Bluetooth LED on the Home
Screen is illuminated, and CONNECTED TO
(DEVICE NAME)

briefly appears in the

message area.