Clear-Com FreeSpeak Antenna Splitter - Manual (Page 116)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
6 - 1 6
standard carriers 0 to 9 (1880 to 1900 MHz) are designated as
“0x03FF000000.” Other parts of the world, such as South America, use
Extended Carriers, such as 18 to 27 (1910 to 1930 MHz), designated
as “0x0000007FE0.” The DECT stacks in both the FS-TA
transceiver/antenna and the FS-BP beltpack must be told which group
of 10 carrier frequencies to use via the “mask,” when they are first
initialized.
Connection Info
Connection Information defines all of the various DECT information for
the beltpack transmission and link to the transceiver/antenna. It also
gives the Carrier Number and Slot that the beltpack is currently using
(this can dynamically change as needed during use). In addition, the
Received Signal Strength Indication (RSSI) is numerically indicated,
with 55 being the highest value; also, the error percentage is shown.
Adjust Contrast
Adjust Contrast provides a slide bar going from “-“to “+”, allowing the
user to adjust the contrast on the display. Typical range is between 1/2
and 3/4 toward “+”.