Clear-Com FreeSpeak Antenna Splitter - Manual (Page 153)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 1 0 - 3
• Click the ‘Retrieve’ button in the "Serial Comms" section of the
dialog. Retrieval of the configuration should take around 1 min. 15
secs. If the program fails to connect to the Freespeak basestation,
the following dialog will be displayed:
Figure 10-3: Configuration Editor Serial Timeout
• If this occurs, check the cable, PC and basestation connection,
and also make sure that 30 seconds have elapsed since powering
on the basestation to ensure that serial comms have been
activated.
• Once the configuration has been retrieved from the basestation,
the display should appear as follows:
Figure 10-4: Configuration Setup