Groups tab, Selecting the group to edit, Changing the label of the group – Clear-Com FreeSpeak Antenna Splitter User Manual
Page 170: Changing the members of the group, Groups tab -20, Selecting the group to edit -20, Changing the label of the group -20, Changing the members of the group -20, Figure 10-22 groups tab -20
Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 0 - 2 0
The Vox level specifies the audio level at which the audio path is made
if the use of Vox is enabled. The Vox trigger level can be set in the
range -70dB to -10dB.
GROUPS TAB
Figure 10-22: Groups Tab
SELECTING THE GROUP TO EDIT
Select which of the ten available groups is to be edited using the
up/down arrow buttons next to the right of the label edit box.
CHANGING THE LABEL OF THE GROUP
Select the group to be changed, then over-type the text in the label edit
box.
CHANGING THE MEMBERS OF THE GROUP
The groups tab displays two lists of members; the “Available Members”
lists shows the members available to be placed in the current group
and the “Current Membership” list shows the current group members.
To place a new member into the group move the mouse pointer over
the member in the available list and single click. The member will be
transferred to the group membership list. To remove a member from a
group place the mouse pointer over the member and single click. The
member will be transferred from the group membership list to the
available members list.