Clear-Com FreeSpeak Antenna Splitter - Manual (Page 155)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 1 0 - 5
Figure 10-7: Configuration Setup
The four buttons at the bottom of the Configuration Editor screen
provide the following functions.
Help
Opens the online help for the Configuration Editor.
Clear Map
Clears the current map from the Configuration Editor buffer. All the
parameters set in the editor will be reset to the startup defaults.
Send File
Sends a firmware file (normally a 4kr file) to the basestation. This is
normally only used to update the basestation firmware.
Exit
Exits the Configuration Editor. If a map has been changed or retrieved
from the basestation and not saved the user will be offered the option
to save the map before exiting the editor.