Clear-Com FreeSpeak Antenna Splitter - Manual (Page 131)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual 7 - 1 5
• Press button C to set the Tap Latch mode.
KEYLOCK
Keylock allows the scroll buttons to be disabled when on the main
page after 3 seconds of inactivity to prevent accidental activation.
• Select Button options on the programming menu.
• Select keylock on the button options menu and use the scroll buttons
to select Keylock On or Keylock Off.
• Press button C to set the keylock mode. If keylock is on a symbol will
be displayed on the main pages showing that the keys are locked.
To temporarily disengage keylock press and hold the scroll keys
simultaneously for 3 seconds. A short beep in the headphones will
signal that the keylock has been disengaged.
PTT CONFIGURATION
PTT configuration allows a PTT switch to be enabled or disabled.
Note: These features are only available on PD2202 beltpacks.
• To configure PTT set to the Button options menu and use the scroll
keys to select PTT configuration.