Clear-Com FreeSpeak Antenna Splitter - Manual (Page 126)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
7 - 1 0
• This facility allows the user to select a level of microphone gain and
so control the sensitivity of the microphone in the headset. Use the
left and right scroll buttons to set the microphone level by moving
the slider. The level can be set from 20dB to 65dB in steps of 5dB.
• Press button C to select the level setting and return to the previous
menu or use the scroll buttons to select Exit and press button C to
exit.
• The Microphone menu showing the Noisegate level option selected.
• This facility allows the user to select a level at which the audio is
gated to prevent background noise being transmitted. Use the left
and right scroll buttons to set the microphone level by moving the
slider. The level can be set from 0 (off) to 14 is steps of 1.
• Press button C to select the level setting and return to the previous
menu or use the scroll buttons to select Exit and press button C to
exit.
Release 2.0.2 includes a mic profile which cuts the bass by 12 dB and
boosts the treble by + 3 dB. This is permanently set for all modes.
The MkII beltpacks include a hardware mic gate and in release 2.0.2
this has been activated on Mic noise gate level 1 to allow a very low
whisper on the beltpacks.
THE STATUS (INFORMATION) MENU
This function appears after the user has selected the Information
symbol from the main programming menu.
• The Status (Information) menu showing the Role Information icon
selected. Note that this face icon is used in two different menus. It