Clear-Com FreeSpeak Antenna Splitter - Manual (Page 140)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
8 - 6
PD2203 FRONT CONNECTOR PANEL
Figure 8-3: FreeSpeak Splitter Front Connector Panel
Basestation Connection Indicator Light
This yellow light indicates that the PD2203 splitter is receiving data
from the FreeSpeak basestation.
Matrix (FreeSpeak Basestation) Connector
This RJ-45 connector accepts a 4-pair data cable from the FreeSpeak
basestation transceiver port. This cable can be up to 1,000 metres
(3,200 feet) in length if 24AWG cable is used or up to 500 metres
(1,600 feet) if 26AWG cable is used.
Note: It is recommended that shielded CAT-5 cable is used.
Splitter-to-Transceiver/Antenna Signal Indica-
tor Light
These yellow lights indicate that a connection from the FreeSpeak
basestation is available to the particular transceiver connected to that
port.
Transceiver/Antenna Connectors
These five RJ-45 connectors are used to connect up to five remote
transceiver/antennas to the splitter, and via the splitter to the
FreeSpeak basestation. Each of these cables can be up to 1,000
metres (3,200 feet) in length if 24AWG cable is used or up to 500
metres (1,600 feet) long if 26AWG cable is used.
1
2
3
4