Clear-Com FreeSpeak Antenna Splitter - Manual (Page 162)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 0 - 1 2
Menu Level
Click on the down arrow to display a list of menu level settings. These
settings control the menus that can be accessed by the beltpack user.
The settings are:
• Advanced - all beltpack menus are accessible to the user.
• Normal - the beltpack user cannot access the Microphone Type,
Headphone Limiter and Local Assignment menus.
• Basic - the beltpack user cannot access any menus except the
Contrast, Master Volume, Key Lock, Tap Latch, Page Lock and
information menus.
• None - the beltpack user has no access to the menus and cannot
change any beltpack settings.
The factory default is Advanced.
Page Change
Page change may be set to one of two values:
• Allowed - beltpack user can change page.
• Locked - beltpack user is restricted to preset page.
The factory default is Allowed.
Keytap Mode
Keytap mode (Tap Latch) determines whether the rotary push buttons
latch with one press or two presses when set in latching mode. Keytap
mode may be set to one of two values:
• Single Tap - rotary pushbutton latches after one press.
• Double Tap - rotary pushbutton latches are two presses.
The factory default is single tap.
RSSI Warning
The RSSI checkbox enables or disables the signal strength warning.
Click on the checkbox to enable signal strength warning. The factory
default is enabled (box checked).
Low Battery Warning
The Low Battery Warning checkbox enables or disables the battery
warning. Click on the checkbox to enable low battery warning warning.
The factory default is enabled (box checked).