Clear-Com FreeSpeak Antenna Splitter - Manual (Page 196)

Clear-Com Communication Systems
FreeSpeak V2.0 Instruction Manual
1 2 - 4
Transmission Method
Method of RF Operation DECT standard, using two DECT bands
per beltpack for wider frequency
response
Modulation QPSK
Frequencies of Operation 1.881 – 1.897 GHz
RF Output 250 mW burst, average level 2 - 4 mW
Theory of Operation
Dynamic allocation of frequencies and handoff of beltpacks among the
transceiver/antennas up to their individual limit of 5 connected beltpacks at a
time; each beltpack is assigned a “virtual port” within the FreeSpeak
basestation.
NOTICE ABOUT SPECIFICATIONS
While Clear-Com makes every attempt to maintain the accuracy of the
information contained in its product manuals, that information is
subject to change without notice. Performance specifications included
in this manual are design-center specifications and are included for
customer guidance and to facilitate system installation. Actual
operating performance may vary.